Ask Experts Questions for FREE Help !
Ask
    Belle101's Avatar
    Belle101 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 3, 2013, 11:27 PM
    Tempstar SP80 Ignition valve recall
    Was there a recall on the dumb valve/smartvalve? And if so, how do we return part for one that functions as it should?

    Ours continues to reignite over and over again during a single cycle. Sounds like it is going to explode.

    We've had a repair guy clean the furnace and try to clean the part. He said many problems with this part have been reported.
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Nov 4, 2013, 05:17 PM
    I thought I heard something about a recall but don't remember for sure. Contact either a local Tempstar dealer or Honeywell.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Tempstar High Efficiency SP80 won't light? [ 0 Answers ]

Help please, We just tried the heating system in prep for this winter, it would not light, the fan motor comes on insidethe heating unit, nothing comes out the vents and the burners don't light. Done the restart procedure, even left the gas off a couple of hours, but still no luck. Yes the...

Smartvalve for tempstar sp80 [ 3 Answers ]

How can I test my flame sensor to see if it is bad?

Tempstar sp80 [ 3 Answers ]

My tempstar sp80, maybe 15 years old, blasts with flame a few times before running. What's going on?

Tempstar SP80 w/SV9500. No pilot. [ 7 Answers ]

Woke up a little frosty this morning. Furnace is blowing, but no heat. I pulled the top cover on the SP80 and witnessed the startup sequence. I see no glow from the smart valve ignoter/flame rod assembly (Q3400) and the pilot never lights. The small motor/fan that gets air flow going is running,...

Age of Tempstar SP80 [ 1 Answers ]

I own a condo that I am selling. Showed it tonight and the potential buyers asked how old the unit was. It is a Tempstar SP80 but I have crawled all around the unit looking for a plate with a serial or date. Cannot find one. Does anybody know the date range that this model was made so I can at...

View more questions Search