Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Tempstar SP80 w/SV9500. No pilot.
[ 7 Answers ]
Woke up a little frosty this morning. Furnace is blowing, but no heat. I pulled the top cover on the SP80 and witnessed the startup sequence. I see no glow from the smart valve ignoter/flame rod assembly (Q3400) and the pilot never lights. The small motor/fan that gets air flow going is running,...
Age of Tempstar SP80
[ 1 Answers ]
I own a condo that I am selling. Showed it tonight and the potential buyers asked how old the unit was. It is a Tempstar SP80 but I have crawled all around the unit looking for a plate with a serial or date. Cannot find one. Does anybody know the date range that this model was made so I can at...
Heil SP80 Won't Ignite
[ 11 Answers ]
Last night when I went to bed the furnace was working fine. The power flickered on and off all night, and at 5 am I woke up freezing my butt off. It was 52 degrees in my house. I can hear it the furnace running, but it is not blowing any heat through the vents in my house, nor is it taking in...
Heil sp80 gas settings
[ 4 Answers ]
Good Day: Our furnace is a Heil SP80 model #NU65100BFB2, 100K BTU output, converted to LP gas. The main gas valve failed (Honeywell SV9500M 2682, converted, dead solenoid) We have just put in a new main gas valve (Honeywell SV9501 M2056), and personally put in the gas conversion from NG to...
Heil sp80 gas settings
[ 1 Answers ]
Good Day: Our furnace is a Heil SP80 model #NU65100BFB2, 100K BTU output, converted to LP gas. The main gas valve failed (Honeywell SV9500M 2682, converted, dead solenoid) We have just put in a new main gas valve (Honeywell SV9501 M2056), and personally put in the gas conversion from NG to... View more questions Search
|