Ask Experts Questions for FREE Help !
Ask
    rjnuss17's Avatar
    rjnuss17 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 3, 2013, 03:21 PM
    Not enough hot water on whirlpool eletric
    * I purchased a whirlpool electric hot water about 2 months ago
    * the faucets closest to the heater is fine . But on the second floor, the hot water
    Takes along time to get hot and its really not as hot as it should beas the first floor
    Faucets.What could be my problem?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Nov 3, 2013, 06:43 PM
    Faucets farther away from the heater would take longer to get hot water. They my go through an uninsulated space. What type of faucet is on the second floor? Measure temp at both faucets.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My whirlpool hot water heater has the red light blinking but I still have no hot wate [ 0 Answers ]

My whirlpool hotwater heater has a blinking red light but no hot water, had nothing but trouble with it since I bought it. Have changed every part there is to change

No Hot No Hot Water From a 40 gal Whirlpool electric Water Heater [ 1 Answers ]

I have the 40 gal Whirlpool electric.. same problem here, after two minutes (not even 10 gallons) the water gets cold or barely warm with the shower valve all the way to hot.. Very disapointed with Whirlpool.. my old tank was working like a champ before it started leaking.. I recomand Keenmore next...

How to hookup an eletric hot water separate from oil fired boiler [ 1 Answers ]

Simply said I want to shut boiler off and heat water with electric

Whirlpool washer wtw5200vwh gives little hot water [ 0 Answers ]

When set on hot water, the water comes in for less than 10 seconds, then switches to cold water.

Whirlpool Gas Hot Water Heater [ 1 Answers ]

All day today my heater was working, however sometime around five the pilot went out. I followed the directions on how to re-light it, however it would not stay lit. I even tried tighting the thermocouple. The pilot will go out as soon as I release the button. Is there a way to figure out what...

View more questions Search