Ask Experts Questions for FREE Help !
Ask
    tcoho's Avatar
    tcoho Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 2, 2013, 11:22 AM
    Bryant furnace burners won't light
    I have an old bryant furnace, can't read model # serial # is 1782A66069 has 1980 written on the plate. The pilot lights instantly when thermostat is turned on but the burners never light. There is no heat senser to turn on burner that I can see and it has no fuses, that I can find what could it be?

Check out some similar questions!

Bryant Plus 80 gas furnace won't ignite burners [ 6 Answers ]

I own a Bryant Plus 80 gas furnace. The fan will run if I set the thermostat to "Fan On" instead of "Fan Auto". But the burners will not ignite. I have followed the user manual instructions to re-start the furnace, but that didn't work. I have a gas water heater and it is heating so I know the gas...

Furnace burners won't light [ 1 Answers ]

I have an old (not sure how old) Bard natural gas furnace. Model # C80D36A Serial # L900660603 Pilot light is lit but burners won't light. Any suggestions?

Bryant gas furnace - burners light, but go out in about 4 secs [ 8 Answers ]

This is an older Bryant furnace, model 394GAW. It has electronic ignition. Pilot lights fine and stays burning when thermostat Requesting heat. Burners ignite, but then only for about 4-5 secs, then go out. This Will repeat about every 30 secs or so. The blower never starts. I found...

Heil Furnace burners won't light. [ 0 Answers ]

Hi, I have a Heil furnace, propane, in my shop 125,000/100,000 BTU. Looks to be an older furnace but came out of a remodeled house where it was working. 2" PVC exhaust, intakes in building. TStat is newer (used in house) confirmed good, furnace turns on, exhaust fan runs, igniter makes sparking...

I have a bryant furnace, and the main burners won't ignite... led code reading 34 [ 1 Answers ]

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.