 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Bryant plus 90 cycling
1982 bryant plus 90 inducer starts , gas valve opens,burner ignites and runs for 2 minutes, inducer motor stops flame ceases than main blower starts and runs for 5 minutes. main blower stops ,inducer motor starts and this cycle repeats
constantly as the house thermostat is still calling for heat |
||||
Check out some similar questions!
I have a Bryant gas furnace, model# 310AAV048135. It comes on, runs for a couple minutes then shuts off while the blower still runs. I am getting a fault code of 33, which indicates several things according to the label on the device. Earlier in the summer, I was having a similar problem when...
-- currently the temperature swings are more than 5 degrees
I have a Bryant 80 furnace , had the ignitor replaced in November. Since then the furnace will power up, ignitor and burners will go and then when the blower turns on the burners go out, the blower will go for about 90 seconds and then shut down. It will do this repeatedly sometimes as many as 30...
Thanks for taking your time to read this post! I have a Bryant natural gas furnace model 383KAV036070 that is about 7 years old. It started working sporadically about a week ago. I replaced the thermostat with no luck. It seems that it is reading a trouble code of 34. It will start up and ignite...
I have a Bryant Legacy plus 90 furnace that is about 2 & 1/2 years old. The furnace will kick on and run till the temp on the thermostat is reached, it then shuts down but will immediately start back up again and continue to cycle like this 5 or 6 times until I adjust the thermostat down a degree...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
