 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
We have a Heat Controller single stage geo thermal heat pump. We also have installed some electric heat strips to use as an emergency. We ared using a Honeywell TH6220 Tstat. The system is supposed to lock out the heat pump when you select emergency heat on the tstat, but right now that is not...
This is the second thermostat I'm installing, which is sort of the heart of the problem. I installed the first one (a Rite Temp) about 18 months ago with a lot less trouble. Of course, I removed an older thermostat, so I was able to label the wires properly, etc. But suddenly the display on the...
I am replacing a Janatrol T-state with a Honey well Pro 300 M/n Th3210D104 the wires from the old one were wired as such; Wx2= white, Y= Yellow, G= green, O= orange, R= red, B= , C= blue, E= tan, (there was a non used black wire). The new T-state has the following; E, Aux, Y, G, O, L, R, B, C. I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
