I have a honeywell mercury thermostat with a red and a blue wire only... I bought a ho

Check out some similar questions!

I am updating from an old mercury white rodgers thermostat to a new Honeywell th8000. [ 0 Answers ]

Followed the directions to the best of my ability, but I can't get the AC to kick on? Fan come on, but AC outside doesn't. Any help would be great. Old thermostat had a yellow Y wire soldered to the back of the unit and then connected to the terminal. Also had a jumper running from rc to rh. ...

Can I connect red light wire to spear blue wire to red of newfan light [ 4 Answers ]

Just a quick question.

Wiring from White rodgers mercury switch thermostat to 5 wire Honeywell RTH 110B [ 3 Answers ]

Trying to get the new Honeywell Digital thermostat RTH 110B to work both in heating and cooling modes. 5 wire installation from old White rdogers thermostat. Wire colors are G Y W R Br. Have to switch the R wire with the Br wire to get fan oeprating or A/C. Then have to switch them back...

Honeywell T8411R Blue wire Not Connected [ 1 Answers ]

We were going to replace the TR8411R thermostat with a programmable one and have discovered that we apparently have a heat pump (we just bought the house last week). As we were trying to match the wires to the new thermostat we found that a blue wire was not attached. The installer seemed to...

Installing Honeywell RTH230B, what to do with blue (B) Wire [ 0 Answers ]

I am trying to install of Honeywell RTH230B thermostat. I removed the old Lux mercury thermostat and their were five wires Rh, W, Y, G, and B (blue). The thermostat has place for all of the wires except the B(blue) wire. Do I need a different thermostat or can the B wire be put in the Rc space...

View more questions Search

Check out some similar questions!

Add your answer here.