What can I do if mower want start just turning over

NicoleCarter Posts: 2, Reputation: 1

New Member

Oct 12, 2013, 07:07 PM

What can I do if mower want start just turning over

Change the flywheel out and spark plug and turn an cranked one time and now want start

crigby Posts: 4,343, Reputation: 107

Outdoor Power Equipment Expert

Dec 10, 2013, 06:07 PM

Hi,
Sounds as if the flywheel was not tight enough and it sheared the key.
Peace,
Clarke

Add your answer here.

Check out some similar questions!

Craftsman riding mower runs but shuts off when turning on the mower deck [ 0 Answers ]

I have a craftsman riding mower 26 hp b&s with a 48" deck. It's been running fine till yesterday went to mower and as soon as I turn on the mower deck it shuts off. It starts right back up when I try it again off it goes. It seems like it has something to do with the clutch am I right? Thanks ...

Kenmore electric dryer won't start; timer clicks but drum doesn't start turning [ 2 Answers ]

I used an ohmeter to check start button, thermal fuse, timer, thermostats and they all check out OK. I'm afraid it's the motor and don't know how to get to it to test with ohmeter.

Blades stop turning as soon as I start cutting, but then start again after I back up, [ 1 Answers ]

bolens st160 took blades off2sharpen. When I go2mow it stops after few feet; iback offthe taller grass theblades start turning again, but then I go forward and after a few feet it stops mowing again. The belt clutch loosens the belt but then tightens up again and so on... never had a problem until...

Sound when turning off the ride on mower [ 7 Answers ]

HI I have a cub cadet gt2544 ride on lawn mower the mower goes well but when it comes to turning it off it starts to make a really loud banging sound and not just once like 5 times and I kind of get the feeling that its going to blow or something. Please help

Craftsman mower will not start after blades quit turning and motor was turned off. [ 1 Answers ]

I have a craftsman dyt 4000 lawn mower. I was mowing and the blades quit turning. So I turned the motor off to check the belts and now it won't start, not even a click when key is turned on.