Ask Experts Questions for FREE Help !
Ask
    suehiggins60's Avatar
    suehiggins60 Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 7, 2013, 02:58 PM
    How do I reassemble a Moen antiscald mixing valve
    Moen antiscald mixing valve
    I recently retiled my tub/shower surround and had to remove the valve outer components, handle, etc. including two plastic parts that seem to control the temp limits. When reassembled, I get a different mixture. How do I get back to the way it was? Obviously I reassembled it incorrectly.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Oct 7, 2013, 03:26 PM
    Copied from this web site.
    How to Adjust the Temperature on a Moen Shower | eHow

    1. Turn the Moen faucet handle to the full hot position and allow the cold water to purge from the line.
    Hold a thermometer under the running water, once the water is running hot.
    The temperature should be no more than 120 degrees Fahrenheit.

    2. Shut off the water at the faucet and shut off the two water supply valves to the faucet.
    The supply valves are behind the shower fixture wall. Open the shower faucet once more to
    Drain any residual water and place the faucet in the off position.

    3. Remove the handle from the faucet. The Moen shower handle installs in different ways,
    Depending upon the style. Some have a set screw underneath the handle that you can remove
    With an Allen wrench, and others have the screw hidden behind a decorative cap.
    The screw behind the decorative cap usually requires a Phillips-head screwdriver to remove.
    Pull the handle away from the wall.

    4. Loosen and remove the screw securing the cartridge key stop to the top of the cartridge with a
    Phillips-head screwdriver. Pull the key stop away from the cartridge.

    5. Pull the limit stop ring away and out of the cartridge sleeve just enough that the ring teeth
    Disengage from the sleeve. Turn the ring clockwise to increase temperature, or counterclockwise
    To decrease temperature. You only need to rotate in small increments.
    Insert the ring back into the sleeve.

    6. Install the cartridge key stop and secure with the retaining screw.
    Install the handle and secure it to the faucet with the retaining screw.
    Turn on the water supply and check the hot water temperature again.
    Continue making adjustments to the temperature as necessary.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Moen Shower Mixing Valve [ 2 Answers ]

Can I put a Tuscany handle and backpate on an exsisting Moen mixing valve?

How to reassemble a 93 honda accord valve rocker arm that came completely apart [ 1 Answers ]

How to reassemble a 93 honda accord valve rocker arm that came completely apart. I took the rocker off to change the seals because oil was coming threw the seals but when I took the rocker off and out the arm completely fell apart and I have know idea how to put it back together could someone...

Hot water problem - faulty check valve or mixing valve? [ 8 Answers ]

Hi, We have a weird problem with hot water running cold in our apartment. At all of the faucets and taps we only get hot water for a minute or two and have to turn off the faucet/tap for 30 seconds and back on again to get hot water. Then the same thing happens again. To get continuous hot...

Moen shower mixing valve [ 1 Answers ]

Can I take apart and rebuild a moen shower mixing valve without replumbing


View more questions Search