Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Rocker arm came loose
[ 5 Answers ]
I have aDR lawn vacuum, was running then stopped.I found the intake raocker arm came loose. I put it back on and it runs like a champ. Is there something I have to adjust or fix so it doesn't happen again?
2004 Honda Accord EX Control Arm Replacement
[ 0 Answers ]
I have a 2004 Honda Accord Ex with damage to the rear passenger wheel. All 4 control arms are bent. I have installed all new Honda OEM arms and wheel is still not alighned perfect. I did not realaize I needed to mark on of the control arms so the bolt goes on the correct way. I believe I have it...
2000 Honda Accord Alarm does not arm
[ 1 Answers ]
Hello I have 2000 Honda Accord EX 4dr 4cyl The problem I am having is that when I lock the doors, the buttons lock, however the alarm does not arm. The horn is supposed to beep, lights flash, and the led on the drivers door should blink. This is what happened for all the years that I had the car....
B&S Rocker Arm Adjustment
[ 1 Answers ]
I have the specs for clearance on my OHV system. It is a Briggs and Stratton 14.5 OHV I/C motor. I am trying to get the rocker arms adjusted properly. I have never done this with the type nuts that we have on here. In the middle of the nut, there is a setscrew used for the adjustment. Could someone...
Rocker Arm Bolt Stripped
[ 1 Answers ]
I have a B&S 14.5 OHV and the rocker arm bolt is stripped. Does anyone know what size the thread are that go into the cylinder head? I am hopefully going to try and match a helicoil and retap the threads. Dang aluminum! Thanks in advance! If you have any other suggestion I could try, it would also... View more questions Search
|