Ducan blower No. CG95TC

Check out some similar questions!

Blower & gas exhaust blower runs at all times. [ 0 Answers ]

I have a Thermal Zone 5 ton gas package unit Model R4GA-048K120C, When the unit is turned off the blower & gas exhaust blower runs at all times. In the heat mode on the blower will kick off when the heat chamber heats up & will come on in a min. or 2 like normal, but when the heat kicks off both...

Blower not working when heat (thermostat) is set, but blower comes on when on Auto. [ 2 Answers ]

When I set the thermostat for the heat the blower does not come on. When I turn the fan on Auto the blower comes on. What's my problem?

I have a trane eletric ignition heater and blower furnace is heating up but no blower [ 1 Answers ]

My thermostat is a white /rodgers module this clicks to start but no air blowing from the furnace in the attic which is a trane model and the same with cold air the thermostat clicks the ducane model outside whirs but no cols air.

I am having a problem with a Ducane CG95TC furnace. [ 0 Answers ]

I am having a problem with a Ducane CG95TC furnace. Furnace blower motor starts than stops after 5 or so seconds. I got a failure code of three flashes on the red led. I made sure all small black hoses are clear, but, still won’t fire.

45692-001 blower control board will not turn blower on in either heat or cooling mode [ 2 Answers ]

Armstrong G1N80 furnace blower control board will not turn on fan at all. Not in heat or cooling mode. I can hear a click when fan should be energized, but no fan startup. Pigtailed the fan hot and neutral,and fan works fine. Is this just a blower control board problem, or something else? We had...

View more questions Search

Check out some similar questions!

Add your answer here.