 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I am having a problem with a Ducane CG95TC furnace.
I am having a problem with a Ducane CG95TC furnace. Furnace blower motor starts than stops after 5 or so seconds. I got a failure code of three flashes on the red led. I made sure all small black hoses are clear, but, still won’t fire.
|
||||
Check out some similar questions!
Have a 7 year old Ducane furnace that turns off before getting to the desired temperature and the HEAT cycle is still showing on the thermostat. It only does this when I ask it to go up around 2 degrees. The LED is giving a 6 + 4 reading and I have the manual but don't know if I can try to fix...
I have a ducane furnace and the pressure switch is open when it should be closed. How do I correct this problem?
A post from last month: AC works great - no problems. When switching over to Heat there is nothing; the circit board on the heater is getting power but nothing is turing on. The Honeywell Tstat is showing "HEAT ON" Trouble Shooting so far: Installed new 5 wire from the Tstat to the Heater/AC...
Where exactly is the filter on a Ducane Gas Furnace
I have a ducane furnace model cmpe100u4b that is not always igniting. Led will read normal then trip to a code call for heat (fast heartbeat) while the furnace clicks into and throughout its heat cycle. Any ideas (I already had to change the fan limit switch and inducer motor).
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
