Ask Experts Questions for FREE Help !
Ask
    DWGeer's Avatar
    DWGeer Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 28, 2007, 05:44 PM
    Trouble Installing Honeywell RTH700 Series
    Trying to install a 7 day programmable thermostat
    Old thermostat is A digital TOTALINE
    This is on a PAYNE Heating and Air System
    R
    G
    Y1
    W2
    BO W1
    C

    Hooked up to Honeywell
    R---------RC with Jumper to R
    G---------G
    Y1--------Y
    W2-------W2
    BO W1---O/B W
    C---------C

    When I set the cool on All it does is turn the fan on the cooling compressor doesn't turn on at all.
    Please help
    Thanks
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #2

    Mar 28, 2007, 07:56 PM
    Is your unit a heat pump. Or just an AC with a gas furnace or an AC with electric strips.
    Need more info before we can be much help;
    DWGeer's Avatar
    DWGeer Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Mar 29, 2007, 05:05 AM
    The unit is a heat pump
    The unit also is electric
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #4

    Mar 29, 2007, 06:14 PM
    Did you set the thermostat up for heat pump and to energise the reversing valve in the cooling mode " O "?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Installing RTH7400 Honeywell Thermostat [ 1 Answers ]

I am replacing my (old) Honeywell T8411R thermostat with a (new)Honeywell RTH7400 programmable thermostat. I need help wiring to the new thermostat. My H/C system is a heat pump system. The old thermostat is wired to the following terminals: W1 - White W2 - Brown G - Green R - Red C - Blue...

Generic thermostat to honeywell. Having trouble please assist. [ 1 Answers ]

So my old thermostat, starting acting up. It was a generic digital thermostat with Y - yellow wire G - Green wire O - not hooked up B - not hooked up but in the wall W - white wire R - Red wire The air handler I have is a ruud

Installing Honeywell RTH 230B [ 2 Answers ]

I know there have been multiple posts regarding this stat. I've collected them and have them as reference. I was hoping to do this right the first time rather than have to troubleshoot. The RTH230B is replacing an older Honeywell mercury stat that has 4 wires: W1-white G- green Rh-red...

Replace Robertshaw 400 series with Honeywell programmable [ 1 Answers ]

Cooling system does not work properly although the heating system works fine. My thermostat is a Robertshaw 400 series installed by my home-builder in 1998. I was informed that the heating/AC system was a (dual) zone system with an upstairs thermostat. I wish to replace this thermostat with...

Installing Honeywell RTH230B thermostat [ 1 Answers ]

I'm having trouble installing a Honeywell RTH230B thermostat. When I took off the old one, I properly labeled the colored wires and turned the electricity back on, but the furnace won't kick on. I checked to see what color wires are coming out of the furnace, and it's just two of them-- green and...

View more questions Search