Ask Experts Questions for FREE Help !
Ask
    jonib's Avatar
    jonib Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 20, 2013, 08:29 AM
    National Electric Code Online
    Do disconnects that are a controlling a receptacle (on the opposite side of the wall) required to have the 30" clearance?
    hfcarson's Avatar
    hfcarson Posts: 1,003, Reputation: 49
    Ultra Member
     
    #2

    Sep 20, 2013, 12:03 PM
    Working space requirements are found at 110.26 in the NEC...
    Will this disconnect likely require examination, adjustment, servicing, or maintenance while energized? If so, then the answer is yes.

    If you find this answer somewhat vague, welcome to my world... What I can tell you is that everything electrical really needs some clear working space, required or not. Tell me this, how much clear space do you have? If the voltage was 600V would you be comfortable working on this switch live? If your answer is "no" you should probably provide some additional room...
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
     
    #3

    Sep 20, 2013, 01:10 PM
    Are you talking about a snap switch controlling a 15 or 20 amp receptacle outlet?

    We need quite a bit more help from you in order to answer your inquiry.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

National electric code online [ 2 Answers ]

What is max. and min. distance you can have on the service wire coming into your house top when uning a riser/

National Electric Code Online [ 2 Answers ]

Is it permissible to run romex without a conduit on the ceiling of your garage When the garage is enclosed with sheet rock and the romex will be on the Exposed side of the sheet rock? If a conduit is required will it have to be Metallic?

National electric code online [ 1 Answers ]

What is the minimum distance between supports for "free air" low voltage cabling. There is no cable tray. I will have to hang some hooks to support the cable. This is in UT

National Electric Code Online? [ 1 Answers ]

What is the electrical code for a/c ciruits how many a/c can go on a 120v 20a circuit

National Electric Code Online? [ 5 Answers ]

What is the ampacity of a #3 aluminum conductor in free air


View more questions Search