Ask Experts Questions for FREE Help !
Ask
    bobdunn70's Avatar
    bobdunn70 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 9, 2013, 12:39 PM
    How to wire a fan switch replacement on a 3 speed hunter ceiling fan
    Replacement switch is a Westinghouse Angelo Bros. it has wire openings labeled L, 1, 2. & 3.

    I have wires colored: Black, Brown, Green, & Grey.

    Which wire goes in what opening in replacement switch?

    Thank You
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Sep 9, 2013, 01:47 PM
    L goes to black. You will need to try pairing each wire after that. There is no industry standard for numbers or colors.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

3 speed, 4 wire ceiling fan pull chain switch replacement [ 20 Answers ]

I recently changed the 3 speed 4 wire switch on a ceiling fan as the old one had a broken collar. I purchased a replacement at Lowe's. The replacement worked at high speed only. I was careful in noting which color wires went into slots 1,2, 3 & L. Thinking that the new switch was defective, I...

3 speed, 4 wire ceiling fan pull chain switch replacement [ 0 Answers ]

What color wires go to which slot? On the switch there is 1,2,3 & L and I have yellow, purple, black and orange wires.

Need replacement switch for Hunter Ceiling fan [ 2 Answers ]

I went to Lowe's where I originally purchased the Hunter Ceiling Fan, they had two switches, one was a 4 wire and one was an 8 wire. The one from my fan happens to be a 4 wire, I installed the switch carefully replacing each wire in the corresponding slot as was on the original one. Once...

Ceiling Fan 3 Speed Switch Replacement [ 3 Answers ]

ceiling fan 3 speed switch replacement. purchased new one, took off the old bad switch wiring as follows: L = RED 1 = BLACK 2 = BLUE 4 = BLACK I rewired EXACTLY as came off the bad switch and as marked on the new switch, plug it in, pull the chain and NOTHING happens on ANY amount of...

Need replacement fader speed switch for ceiling fan [ 3 Answers ]

I have an old ceiling fan that has a three way pull string switch which is working properly(1. off,2. High, and 3. current to a rotary speed control switch). The speed control switch is broken. I have not been able to find a new switch as there is not a manufacturer's name on the switch, however...

View more questions Search