Ask Experts Questions for FREE Help !
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member

    Aug 27, 2013, 04:25 PM
    How to remove dash in 2006 fusion to replace air temp sensor
    Air temperature switch is bad. How do I remove the dash to replace it, or is there another way to get to it without removing dash?
    ma0641's Avatar
    ma0641 Posts: 15,681, Reputation: 1012
    Uber Member

    Aug 27, 2013, 06:03 PM
    Googled topic and found hits. Not easy. Best you do same and see if you are up to task.
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member

    Aug 29, 2013, 06:04 PM
    Got it done. Had to remove the dash. No short cuts that I could find. About 31/2 hr job to replace a $20.00 sensor
    SpaParts's Avatar
    SpaParts Posts: 48, Reputation: 3
    Junior Member

    Oct 15, 2013, 12:00 AM
    Some important information for replacing the air temp sensor.
    At first, you have to remove the instrument panel. Then please refer to Body and flame, interior Molding / Trim, Dashboard / instrument panel see: Body and Frame/ interior Molding /Trim/ Dashboard /instrument panel. Then detach the A/C evaporator discharge air temperature sensor.
    Then remove the evaporator discharge air temperature sensor.

Not your question? Ask your question View similar questions


Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.

Check out some similar questions!

Air Charge Temp, Sensor [ 0 Answers ]

What all (preferably in detail) would come about if the air charge temp, sensor went out on my 1990 civic. As far as the car acting funny or running weird

Ambient air temp sensor [ 2 Answers ]

Can anybody tell me wheere the ambient air temp sensor is on a 1996 dodge ram?

Intake Air Temp Sensor (IAT) 2000 Caravan 3.8L [ 4 Answers ]

I am getting a fault code that states the Intake Air Temp Sensor (IAT) is either high or low voltage on my 2000 Grand Caravan 3.8L. It is displayed on the odometer as fault code 23 = OBD-II code P0112 or P0113. I know it is a thermistor that changes resistance as air flows over it. I read...

View more questions Search