Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Cars & Trucks (https://www.askmehelpdesk.com/forumdisplay.php?f=41)
-   -   How to remove dash in 2006 fusion to replace air temp sensor (https://www.askmehelpdesk.com/showthread.php?t=764529)

  • Aug 27, 2013, 04:25 PM
    esquire1
    How to remove dash in 2006 fusion to replace air temp sensor
    Air temperature switch is bad. How do I remove the dash to replace it, or is there another way to get to it without removing dash?
  • Aug 27, 2013, 06:03 PM
    ma0641
    Googled topic and found hits. Not easy. Best you do same and see if you are up to task.
  • Aug 29, 2013, 06:04 PM
    esquire1
    Got it done. Had to remove the dash. No short cuts that I could find. About 31/2 hr job to replace a $20.00 sensor
  • Oct 15, 2013, 12:00 AM
    SpaParts
    Some important information for replacing the air temp sensor.
    At first, you have to remove the instrument panel. Then please refer to Body and flame, interior Molding / Trim, Dashboard / instrument panel see: Body and Frame/ interior Molding /Trim/ Dashboard /instrument panel. Then detach the A/C evaporator discharge air temperature sensor.
    Then remove the evaporator discharge air temperature sensor.

  • All times are GMT -7. The time now is 04:43 AM.