 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Water heater burns and heats up little then shuts off burner
I light the water heater with the electric igniter then turn it to on. It will light and hold a flame for a while. After while here a little sizzling noise but I suspect it is from condensation. It will still burn then shut off. I noticed the water is not as hot as usual it is luke warm. Then the water heater won t restart after I run the warm water out. Seems to take out the pilot also. What could this be?
|
||||
Check out some similar questions!
Is it normal for water pressure to rise substantially while the water heater is heating? I recently had a new gas water heater installed. My HOA advised owners that they may need to have their pressure reducing valves replaced/repaired. I purchased a pressure gauge and the pressure seemed to...
My floor near my water heater is warm all the time. The water heater is sitting on a raised platform in my garage. The platform is not warm, but the garage floors are warm. I donot hear any water sound from my T&P valve, but the drain is warm. Could there be a leak in the T&P valve, that's warming...
Quit this afternoon after everything was closed. Burner will light and burn, when the pilot quits the burner quits. Armstrong outside unit model PGE10A42D100-1PA
My water heater leaks about 1/2 once of water every time the burner turns on to heat the water. It leaks form the pressure relief valve. What the problem. Thanks
I am not currently getting any hot water out of my water heater. The flame comes on and burns for a few seconds and then shuts off. This same patterns then continues to repeat.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
