Check out some similar questions!
ACG42G1 Condenser Unit
[ 4 Answers ]
When the condenser first starts there is a slight grinding noise. Fan spins as it should and the grinding goes away. Are the bearings going out in the motor? Unit is level and has been cleaned. There is maybe a quarter inch of free play in the shaft trying to slide it in and out. Any help would be...
Condenser fan
[ 0 Answers ]
2 ton only 3 wires I replaced cap exactly the way it should yet the motor is going backwards. Motor is bad right?
Condenser fan motor
[ 2 Answers ]
Motor has four wires yellow, black, brown, and brown with white sripe. The od motor only had three wires black,red and brown. On the new motor I hooked the yellow to L1 the black to L2 and the two brown to fan on the dual cap. The motor starts, runs but it gets very hot and shuts off after a few...
Lenox china valueII My Aunt left me 2 sets of china. On is Lenox/Harvest
[ 0 Answers ]
I have 12 5 piece place settings of Lenox/Harvest china in perfect condition; How much is it worth?
Condenser fan quits
[ 19 Answers ]
My condersor fan was trying to turn very slow. I removed it and oiled it and it freed up. Only ran 30 min then quit. Compressor still running.replaced fan motor it had a 1/3 hp installed a 1/4 same amps and rpms. Would run 50 min then quit. Replaced capacitor it was a 40/7.5 it ran but no cool air.... View more questions Search
Add your answer here.
|