Ask Experts Questions for FREE Help !
Ask
    jackie41971's Avatar
    jackie41971 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Aug 12, 2013, 09:00 AM
    Whirlpool calypso washer
    My whirlpool automatic washer with calypso wash motion will not power up. I have checked the outlet and the house power panel. For 1 week, I was able to unplug the washer for 5 minutes and get it to power up, but after each load I would have to repeat the process. NOW it will not power up at all. What could be the problem? Last year, I replaced one control board #8541034 along with the core. That problem was a code problem.
    Thank you!
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Aug 13, 2013, 08:35 AM
    See if these help: https://dl.dropboxusercontent.com/u/...%20Washers.zip
    https://dl.dropboxusercontent.com/u/...c%20washer.pdf
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My calypso washer is not draining [ 0 Answers ]

My whirlpool calypso is not draining. I have read previous post and got good ideas about fixing this problem but now the only problem is I can't get the dang thing apart. Any answers for this? I'm sure its probably easy but I'm new to this thing haha. Any help would be great

Calypso washer will not drain [ 4 Answers ]

Model #110.22062102 I have read about many problems with this type washer and it not draining. I have opened it up and cleaned out all the hoses (lots of lint and 4 underwires... ) and also pulled the pump (didn't find anything in here and it seems to turn free) twice! I have also checked the...

Whirlpool calypso washer squealing [ 0 Answers ]

What causes my whirlpool calypso washer to squeal while running?

Kenmore Calypso Washer [ 1 Answers ]

I have a Kenmore Elite Washer with the Caypso Agitator. The washer will go through the wash cycle but will not go into the rinse/spin cycle. The digital display flashes "FL". How to resolve? Also, can the unit be forced to pump the water from the drum without proceeding through a complete cycle?

Why does my whirlpool calypso take 4 hr to wash a load? [ 1 Answers ]

I have a calypso 6years old it is all electronic. It starts to wash and as it counts down from say 44min you can hear it cutting on and off it will run for about 1 second and stop for 10 then run for 1 second and stop for 5 over and over through the intire wash cycle. This I figure is why it taks...

View more questions Search