Craftsman blower kill switch

debstep62 Posts: 2, Reputation: 1

New Member

Jul 11, 2013, 09:31 PM

Craftsman blower kill switch

Took handel apart need to know where the wire attaches back to...

crigby Posts: 4,343, Reputation: 107

Outdoor Power Equipment Expert

Aug 4, 2013, 08:33 PM

Hi,
Really need a model number here, probably begins with 358. Other decal info could help,also.
Peace,
Clarke

Add your answer here.

Check out some similar questions!

02 Craftsman LTX1000, runs rough, seat sensor doesn't kill [ 2 Answers ]

I got an 02 Craftsman LTX1000 for free. Very happy. It ran great (really purred) after I found the bad fuse that got me this freebie. Seat sensor never killed engine when I lifted off, but would make engine run rough. Otherwise ran great. Now, it's running rough all the time, as if my butt is not...

Did I kill my Leaf Blower? [ 3 Answers ]

Wouldn't you know it, I just bought an ECHO PB-251 hand held leaf blower and ran it for an HOUR on straight gas. I thought the can had mixed fuel in it but forgot I used it last to kill some yellow jackets over the summer. I thought it was running a little rough. I used a full tank of gas and then...

Kill switch [ 1 Answers ]

A friend rewired my craftsman mower,a 12 hp briggs. Push one toggle switch, the mower starts,then to turn off you get off and lift arm that engages blades. That engauges safety and engine stops. The system seems to always hot.

Craftsman mower kill switch [ 1 Answers ]

I got off the lawnmower while it was running to move a toy and the mower stopped, but now I can't get it started again. Am I missing something? I tried shifting to neutral, disengaging the blades and pushing in the clutch before I tried to start it again, but it's like I'm getting no juice from...

Kill/stop wire on craftsman [ 5 Answers ]

Craftsman 5.5 hp lawnmower - Model # 917-387070 (? ) How do I replace this cable? It looks like there may be a spring missing (if there was one) down near the engine. I know something is wrong with the cable because it did finally start, then would not cut off. Any help is appreciated. I have...