 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Changing old 2 wire thermostat black and red wires to new digital
My old thermostat has 2 wires - a black and a red and the thermostat has no markings at the connections. The connection for the new one has 2 connections labeled Y and G. What new connection is for the black wire and which for the red one?
|
||||
Check out some similar questions!
Just changed light fixture. When I put the power back on the light worked but the switch on the wall will not shut the light off. In the ceiling there was 3 wires. One black,one white and one red. The fixture that I put up has only black, white and ground. So I attached the black to black,...
I am currently changing a ceiling fan and putting up a chandalier (black smooth wire, black rib wire, and ground) instead. In the ceiling I have 1 white, 1 black, 1 red, and 1 ground. The wall switch area use to have 2 switches (one for ceiling fan light and other for fan) however all we need is...
Installing outdoor light fixture. Fixture has a white, a black and a green ground wire. There are two switches and a sensor in the garage. The wiring on the wall outside the house to the fixture has a red, a black and a white wire. How should the wires be connected for proper operation of the...
I have red, white and black wires coming off the wall of my old thermostat and I bought a programmable thermostst and confused which wire to connect. I HAVE Rc,Rh, W,Y,G.
I have a baseboard hot water system with a gas boiler. Boiler is 6-7 years old. It has three zones with 3 separate pumps and thermostats. I checked the thermostat wires and they are 110 volts. Folks at the local hardware store I talked to were surprised with the 110 volts but suggested I could...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
