Ask Experts Questions for FREE Help !
Ask
    mwfFrost's Avatar
    mwfFrost Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Jun 30, 2013, 07:51 PM
    Blower motor wiring
    I have AO Smith motor 1/3hp with red,black and white wires where do I connect them please help
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jun 30, 2013, 07:58 PM
    Wiring diagram should be on the wiring box cover. What is voltage rating?
    mwfFrost's Avatar
    mwfFrost Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Jun 30, 2013, 08:17 PM
    115volts and no diaphragm onmnm motor
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #4

    Jun 30, 2013, 08:46 PM
    Neutral to white, switch lead to one of the two terminals usually L1 and L2 with the red on one and black on the other. Turn on motor. If it rotates the way you want leave it. If it rotates wrong, reverse black and red but leave hot line on same terminal.
    mwfFrost's Avatar
    mwfFrost Posts: 5, Reputation: 1
    New Member
    		  
    #5

    Jun 30, 2013, 09:08 PM
    Quote Originally Posted by ma0641 View Post
    Neutral to white, switch lead to one of the two terminals usually L1 and L2 with the red on one and black on the other. Turn on motor. If it rotates the way you want leave it. If it rotates wrong, reverse black and red but leave hot line on same terminal.
    which terminal I have three one with 2connections other with 6
    mwfFrost's Avatar
    mwfFrost Posts: 5, Reputation: 1
    New Member
    		  
    #6

    Jun 30, 2013, 09:11 PM
    Blower motor wiring
    115volts 3 wires red black white also the 2 capacitor brown wires
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #7

    Jun 30, 2013, 09:17 PM
    You said red black and white! That appears to be a multi speed motor. Contact
    AO Smith " aosmith.com" with the model number.
    mwfFrost's Avatar
    mwfFrost Posts: 5, Reputation: 1
    New Member
    		  
    #8

    Jun 30, 2013, 09:21 PM
    Quote Originally Posted by ma0641 View Post
    You said red black and white! That appears to be a multi speed motor. Contact
    AO Smith " aosmith.com" with the model number.
    Thank you family appreciated much
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #9

    Jul 1, 2013, 05:46 PM
    White goes to neutral, black is high speed, red is low, brown to one side of cap, brown with white stripe to other side of cap.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring for ac blower motor [ 0 Answers ]

My old motor had three wires, purple, brown, black and the ground. The new motor has a brown, brown with white stripe, black, white and green. Can you please tell me what goes where?

Blower motor wiring [ 2 Answers ]

Replacing blower motor on intertherm package unit. Rotates slow then stops. Wiring on old motor 3 wireBLACK,YELLOW, ORANGE. NEW MOTOR , 5 WIRE 2 BROWN, BLACK, RED,PURPLE, 240 volt , 1 PH :eek: How do I wire up new motor?

Wiring a Blower motor [ 4 Answers ]

I just purchased a GE 3585 model# 5KCP39JGN653T 1/3 hp 115 volts with a permanent split capacitor. I rewired the motor just as the diagram showed and the same as the old motor. From motor White(common) to cap, Brown to cap, Bk(hi) to bk, Rd(low) to rd. From Jbox the other White to cap. There was a...

View more questions Search