Ask Experts Questions for FREE Help !
Ask
    Cheryl Konno's Avatar
    Cheryl Konno Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 6, 2012, 05:46 PM
    Wiring for ac blower motor
    My old motor had three wires, purple, brown, black and the ground. The new motor has a brown, brown with white stripe, black, white and green. Can you please tell me what goes where?

Check out some similar questions!

Blower Motor wiring [ 4 Answers ]

Blower motor has 4 wires +ground. 1 yellow 1 blk & 2 brwn(one with a small copper band on it) How is it to be wired to power? Which is common and which for speed? Thanks.

Blower motor wiring? [ 0 Answers ]

Purchased a new unversal blower motor that has 4 wires not counting the run capacitor wires, the old one has 5 wires not counting the run capacitor wires, what do you do in this situation

Blower motor wiring [ 10 Answers ]

A/c has heat strips. Old motor black wire went blower relay, red to L2. I did as you said, BLACK TO L1, PURPLE TO L2, BROWN to CAPS. (WHAT about blower relay?) Could I have a bad blower relay , possible running on 120 volt when compressor comes on?

Wiring a Blower motor [ 4 Answers ]

I just purchased a GE 3585 model# 5KCP39JGN653T 1/3 hp 115 volts with a permanent split capacitor. I rewired the motor just as the diagram showed and the same as the old motor. From motor White(common) to cap, Brown to cap, Bk(hi) to bk, Rd(low) to rd. From Jbox the other White to cap. There was a...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.