 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How to wire 230 volt gfi to pool pump
I have a new pool pump a Hayward 3/4 hp super pump The old motor was removed and pool closed for two years. I have a federal Pioneer Stab-loc Gfci breaker that was wired for 230 volts at 15 amps all the wireing is still at the panel but doesn't enter panel. This wire is 14 gauge 3wire (white black red and green) .
How do I wire to breaker, and how do I wire pump |
||||
Check out some similar questions!
To Whom It May Concern: I need some advice on a 4 3 wire with ground wire; where does the ground wire go on a 208/230 setup? I am using a 50 amp double pole breaker. Sincerely, Tracy G. McDougal [email protected]
How do I connect up a 4 wire 230 volt fan on a heat pump it has a capacitor 2 white wires a blue and a red
How to wire a 230 volt 10 amp pump to a 110 volt float switch with a contact switch.
Wiring 230 Volt Pentair Pool Pump. It has Line 1, 2, 3 ground is separate to chassis. Which one is common?
Hello, I am rewiring switched for two pool pumps. The old set disintegrated so I cannot tell how they were wired. The two pumps are recirc and booster and are both 230v. I would like to wire them so that the booster can only turn on when the first pump is on. How can I manage that wiring with no...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
