Ask Experts Questions for FREE Help !
Ask
    Psapp's Avatar
    Psapp Posts: 2, Reputation: 1
    New Member
     
    #1

    Jun 15, 2013, 09:56 AM
    Murray riding mower ignition switch doesn't work
    I have an older Murray 40" riding mower and the ignition switch stopped working. Sometimes I can jiggle the clutch and it will turn over but now it does nothing.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #2

    Jun 15, 2013, 10:26 AM
    Hi,
    Look under the seat for the model number, it begins with the deck size, i.e. 40. I will give you a link to a parts breakdown, most of which include the electrical schematic. From your description I would say that the switch associated with the clutch, the one you jiggled, is likely bad since the battery voltage normally goes through two safety switches to reach the trigger circuit on the solenoid.
    Peace,
    Clarke

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I remove the ignition switch from a murray mower model 309000x8 [ 3 Answers ]

I have an electrical problem with murray mower 309000x8 I have checked the battery, the relay, the coil and all appear to be functional but The starter switch how do I get to the wires my hand book has parts and number but not how to and where to.

Riding mower ignition switch diagrams [ 3 Answers ]

I have a MTD Hechinger mower model 146-834-372 with electrical problems. I have chased out all of the wiring but am not sure of the internal functions of the ignition switch. Any one know of where I can find this information? I cannot find it on the MTD site. The switch is a standard 5 pin with the...

I just bought a older murray riding lawn mower.I put in new key ignition switch and [ 2 Answers ]

I have put in new ignition switch and a new battery.Nothing, won't turn over and I know nothing about engines.What can I try next to check.. Also does the bolts on the new battery need to be special ones.I lost the ones when removing so used bolts I had it.They fit right? I know I am a dumb...

Murray riding Mower, Ignition [ 1 Answers ]

Will start and run fine, but won't shut off with key. I'm checking grounds but have found nothing out of order so far. My next guess would be a faulty ignition switch. Its and older model, 12.5 HP. Any other ideas would be appreciated.

Murray riding mower switch [ 2 Answers ]

Changed ignition switch,still won't cut off,need diagram about the proper wirering..


View more questions Search