 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
American Standard Air Leak
Have an American Standard Toilet model#4392 that appears to be leaking air from the fill area. Not sure how to fix this. I have adjusted the 2 different screws (one yellow plastic, one metal). I can adjust them both enough to make the air stop, but the water level is too low if I adjust the yellow too far, and the water does not fill if I adjust the metal screw enough to stop the leak.
|
||||
Check out some similar questions!
I replaced two american standard stems(with a "top cap" seal). The cold is fine, but the hot has little flow with the new stem and seat.The old stem was wearing into the seat, and the top half of the seal on the stem was separated. I had to put the old stem and seat has well as the broken seal to...
How to remove shower valve american standard
How do you get the faucet off to replace the O ring? We have tried with everything I have in the house and can't budge the base to remove it. Water leaks out from the top of the base when the faucet is turned to the left side of the sink, but is fine turned to the right.
Can the old Mexican version Incesa Standard wall mounted toilet be replaced with the new elongated version of the wall mounted American Standard toilet? Making sure both fits are standard connections... sizes, etc. I've heard 4" center and 4 1/2" center from floor. What do I need to be aware of...
I took my American Standard Stem in to the Home Depot. They compared to to others and said that it was a 2C-14C. Then they gave me replacement Nu-Seal washers and said that there is no seat for this. Is that possible? Here it is with the new washer attached.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
