Ask Experts Questions for FREE Help !
Ask
    monttyj's Avatar
    monttyj Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 11, 2013, 05:28 AM
    Ge spacemaker washer
    Stops so abruptly when done spin cycle it rotates the hole machine an pulls off water level tube at the control panel an will not shut off water on rinse cycle . What would cause the sharp stop is this a common problem on these unit thanks for any help
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Jun 12, 2013, 05:16 AM
    Look at these: https://dl.dropboxusercontent.com/u/...c%20washer.pdf
    https://dl.dropboxusercontent.com/u/...%20Manuals.zip
    I have never heard of this problem, but it sounds like the support springs came loose from body, probably due to rust. If this happened you will have to drill new holes and re-attach them. Plus, there may be other problems.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

GE Spacemaker Washer/Dryer [ 1 Answers ]

Hi all! I just purchased a used Washer/Dryer Stackable unit from Craigslist for $50 and I am in heaven! When I purchased it I was told that the Washer worked BUT the dryer squealed. Easy fix. Not the case. Got the unit home and cracked it open found the support shaft in the back of the drum...

GE Spacemaker Washer Not Draining [ 1 Answers ]

My GE Spacemaker (model WSM2700DAWWW) is not draining after an incident involving our autistic son. He stuffed a shirt in the washer between its drum and frame so that, when the spin cycle began, it could not spin. We smelled/saw some smoke. Initially, it had some clothes in it and would not...

GE Spacemaker Microwave - remove [ 5 Answers ]

Hello, I have Range Top GE Spacemaker Microwave oven that went bad. I'm trying to remove the unit so that I can install the new one. I took out the 3 screws on the top but I can't seem to slide the unit out.. feels like it is stuck to the vertical wall. Does anyone know how to detach the unit...

GE spacemaker washer/dryer blowing circuit breaker [ 3 Answers ]

My unit has started blowing circuit breakers. I assume it started when the exhaust tube disconnected and I was not aware. I have since re-attached the exhaust, but it still continues to blow the breaker. I have checked the plug also, I don't see nothing wrong. Any suggestions?

View more questions Search