Ask Experts Questions for FREE Help !
Ask
    alara0726's Avatar
    alara0726 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 10, 2013, 06:53 PM
    Help with Westinghouse dryer
    Ok I have a white.Westinghouse house dryer had since 2005. I have replaced bearings and now in the process of changing the felt strips. How do I clean off the old strip residue so the new one sticks as it should??

Check out some similar questions!

White westinghouse dryer. [ 2 Answers ]

I have a electric dryer that will not start. I have 0 resistance on themostats, and door switch. I tested the timer with volt ohm meter. With the meter set at 200k and the meter leads connected to the black wires on the motor of the time the meter reads 2.5. It reads the same in the off...

White westinghouse dryer lost power [ 1 Answers ]

Work fine then no power

White-westinghouse electric dryer [ 1 Answers ]

Our white-westinghouse electric dryer, model # DE700EDD5, quit heating. My husband checked the wiring and found that one wire had melted and it broke off in his hand, so he rewired it. Now we are getting heat, but very little. This dryer is one we bought refurbished about 4 months ago from a...

White Westinghouse dryer will not stop [ 2 Answers ]

I have a White Westinghouse dryer that ran and ran on the last load (for way too long but we failed to notice it). Is there a sensor or something that is most likely busted? Thanks Dan

Squeaky White Westinghouse Spacemaker Dryer [ 1 Answers ]

Hello, I'm really hoping that someone can help me. We have a w/d White Westinghouse combo, model number WLC271HW0 and it has recently began making this awful high pitched squeaking noise. I've been reading similar posts on the site and much of the info has been very helpful but I have no idea how...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.