 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Does the drum light come on or the motor work or is everything gone? If everything, check the breakers, there are 2. Push them all the way off and then back on. Make sure the plug is in all the way. If just no heating, you may have lost the ignitor or possibly a limit switch has gone bad. Give us a little more info please.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have an older White Westinghouse dryer. It has worked for over 8 years just fine. Two months ago the drum quit turning and I had to replace the belt and the idler pulley. The belt was stretched and frayed and the ilder pulley had slipped completely off and fallen onto the wheel that is turned by...
When I push the start button, it just hums and quits humming when I release the button. Belt is OK. What should I check next?
Our white-westinghouse electric dryer, model # DE700EDD5, quit heating. My husband checked the wiring and found that one wire had melted and it broke off in his hand, so he rewired it. Now we are getting heat, but very little. This dryer is one we bought refurbished about 4 months ago from a...
I have a White Westinghouse dryer that ran and ran on the last load (for way too long but we failed to notice it). Is there a sensor or something that is most likely busted? Thanks Dan
Hello, I'm really hoping that someone can help me. We have a w/d White Westinghouse combo, model number WLC271HW0 and it has recently began making this awful high pitched squeaking noise. I've been reading similar posts on the site and much of the info has been very helpful but I have no idea how...
View more questions Search
|
