 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My Kenmore 110 dryer 92832100 ignitor is not coming, subsequently the gas valve is no
My Kenmore 110 dryer 92832100 ignitor is not coming, subsequently the gas valve is not opening. I have checked the hot surface ignition module it is not burned out and has good continuity. The burner high limit is also closed.
|
||||
|
||||
|
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Dryer was working fine yesterday. Wife went to use it today and it will run. But there is no heat coming out of it. I was going to give up trying to fix it myself, until I called Sears today for a repairman. They want $129.00 just to look at it. Parts are extra. I have never used an ohm meter...
I have a Kenmore gas dryer which the ignitor is not working. The drum turns, but the ignitor does not warm up. I replaced the ignitor which did not solve the problem. What should be checked next?
Our gas dryer 417.93142202 (5/03) stopped heating. We remove a large amount of lint (5 yrs of dog hair!) in the housing and bottom of lint trap, gas lit twice then stopped again. Ignitor is glowing orange every time and we get a fast clicky sound as the gas tries to light but fails (this is...
I have a kenmore gas dryer approx 3 yrs old recently it quit working runs but does not heat I changed celonoid also thermostet/flame sensor help parts I used were from older model that I replaced in past
View more questions Search
|
