 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Bryant 373lav blower motor will not start stay on
It stopped working about a week ago. If I take the panel off and spin by hand it sounds like it wants to start up and sometimes does. Is there troubleshooting steps I can follow or should I replace the motor
|
||||
Check out some similar questions!
Bryant 373lav quit. The blower runs as soon as I push the door button but the inducer does not run or turn freely. I see no igniter lighting and of course no flame. The blower gos off after 45 secs or so. The led flashes slow then two quicker flashes I think. Thanks.
I trigger the furnace using the TEST lead to the common lead. The inducer motor starts (somewhat slowly), the ignitor glows, missing gas flow rom the GSV and then the blower tuns on and then shuts off. No fault code. I replaced the gas valve, no change. I checked the pressure switch for the draft...
Good afternoon all, My question is in regards to the Bryant 373LAV Downflow/Horizontal gas furnace. A good friend of mine called for my help because about a month ago, her furnace blower randomly began running all the time and the only way she could shut it off was to flip the breaker on the...
It does a prepurge and ignition and after a short period the burner shuts off. I tried the emergency heat mode and it will do every thing but start the blower.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
