 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Bryant 373lav blower runs 30 secs but inducer does not run or spin freely
Bryant 373lav quit. The blower runs as soon as I push the door button but the inducer does not run or turn freely. I see no igniter lighting and of course no flame. The blower gos off after 45 secs or so. The led flashes slow then two quicker flashes I think. Thanks.
|
||||
|
||||
|
First check to ensure all safeties are good (no roll outs tripped), then check the induce draft motor. If it won't spin by hand with the power off then the motor is seized. If it spins with the power off then verify that the voltage is good to the w terminal on the board. Let me know what you find so we can get you up and running.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My inducer blower run hot is this OK back of inducer gas
I have a Bryant Plus 90 high efficiency furnace, Model 398A, about 14 years old. I am now on my third inducer motor assembly. The plastic blowers on the first two disintergrated. Does anyone have any idea as to why and what can be done to prevent another failure? Besides the inconvenience of no...
I trigger the furnace using the TEST lead to the common lead. The inducer motor starts (somewhat slowly), the ignitor glows, missing gas flow rom the GSV and then the blower tuns on and then shuts off. No fault code. I replaced the gas valve, no change. I checked the pressure switch for the draft...
Good afternoon all, My question is in regards to the Bryant 373LAV Downflow/Horizontal gas furnace. A good friend of mine called for my help because about a month ago, her furnace blower randomly began running all the time and the only way she could shut it off was to flip the breaker on the...
View more questions Search
|
