Ask Experts Questions for FREE Help !
Ask
    OUTTAROUND's Avatar
    OUTTAROUND Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 29, 2013, 07:43 PM
    Craftsman riding mower pto
    When I pull pto to start mower blades engine stalls blades belts pullys can be turned by hand freely
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    May 29, 2013, 07:58 PM
    Well, something is obviously putting torque on the system. Look for a seized or dry bearing.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #3

    Jun 8, 2013, 07:48 PM
    Hi,
    A bad seat switch will shut off the ignition, also.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftman riding mower pto problems [ 9 Answers ]

I have a craftsman 20hp 6spd 42in cut rider. With the MANUAL PTO disengaged the blades are still spinning. Seems to be something jammed on the deck but not sure. A little help would be appreciated. Thank you

2005 Huskee riding mower PTO won't engage and mower dies [ 12 Answers ]

Replaced battery with new one, within several starts the new battery was drained. Mower will start by jumping but only runs a few minutes then dies, also the PTO will not engage at all (replaced PTO switch and still won't engage) does not even attempt to engage, as if there is no power to the...

Riding Lawn Mower PTO [ 1 Answers ]

I have a Rally, made for Craftsman a few years ago by AYP, I am told. At first when the blades were engaged they would cut off after 30 minutes, and the mower kept running. In the meantime something started killing the battery. After a few times when you pulled the PTO switch the blades would not...

Craftsman Mower Electric PTO [ 1 Answers ]

The wires coming out of the electric PTO overheated and burnt the wires up that are inside the electric PTO. Now the mower will not crank to start. Is there a way to jump wires to take the PTO out of the circuit so I can start the mower. The battery shows plenty of voltage so I know it is not...

View more questions Search