 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Coleman ac
Got a coleman furnace/ac presidential 2 and when u flip the switch on the unit to cooling it automatically turns condenser compressor both fans.. There's a new t-stat. I actually took the t-stat wires off and the ac unit turned on fully? All the wires r were they belong? I do hvac for a living but this has got me stumped. Pleas help me!! Thanks
|
||||
|
||||
|
My guess would be that you have a short in the t-stat wires near the stat. Disconnect all stat wires at the furnace and trouble shoot at the furnace control board by jumping the correct terminals for heat, cool, fan. If every thing works correctly when you are bypassing all thermostat wires from stat to furnace, then you know you have a problem with the stat or stat wires. Let me know what you find.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
The diagnostic light blinks twice on Coleman Evcon #DGAHO56BDF natural gas forced air out bottom Mobile home heater. 2 blinks is supposed to be "combustion air switch stuck closed" which is called a pressure switch in the part manual. I have replaced this switch like five times through the years....
Where is the heat anticipator setting for a coleman evcon furnace model dga2075800
I have a large Spencer Coleman oil landscape painting and I was wondering how much his paintings sell for?
My mother has a Coleman Evcon dgat090800 the problem is that the burner will light up on it and burn until the blower kicks on then the burner will quit I can test parts on it but am not positive what the readings should be can someone help.
Blower will not come on in auto
View more questions Search
|
