 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I verified the switch to operate the heating was on heat. And on. And when the switch on the furnace is held down it blows air but doesn't push air through the vents?
My Mother-in-law has a Trane XE60 furnace & the pilot light is blue but only blows cold air when the thermistat is at the on position. When the thermistat is set to auto at 80 degrees nothing happens. She thinks the pilot light might be a bit weak. I've seen in some of my research that there is an...
In just the past couple day my heat wasn't heating the house. I opened the door and there is a red light flashing 3 times and the ignitor lights but only cold air comes out. The paper on the front of the furnace says that 3 flashed means the polarity is twinned. (or something like that) what do I...
My gibson furnace is not heating, when I looked inside, I saw a flashing red light and no flames. What could be the problem?
Hoping for help here. I recently had my ignitor replaced. Before that, the furnace wasn't working at all. Now it starts blowing warm (not hot) air, then gradually over a period of a couple of hours, the air cools down until it is completely cold and the temperature in the house drops drastically....
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
