What is the manifold tube for? Mine keeps falling off

jackmilestone Posts: 1, Reputation: 1

New Member

May 20, 2013, 07:05 PM

What is the manifold tube for? Mine keeps falling off

Kenmore Ultra Wash Dishwasher - The manifold tube will not stay in place. What is is for and how can I keep it in place.

Check out some similar questions!

Can I wire two 15w floresent tube controlers to run a 30w tube? [ 2 Answers ]

Wiring up two fluorescent lighting controllers to double the wattage and length of tube

Mechanism - mechanical only - push rod through tube that raises tube [ 0 Answers ]

Looking for a tube 3/4" OD - with a rod in center - unknown dia - when you push the rod down through the tube - it raises the tube - attachment

What size manifold do I need? [ 8 Answers ]

What size manifold do I need to supply water to five 1.6(gpm) Water closet, Tank, One Piece; one Urinal, Valve 15(gpm), one Lavatory 4(gpm) and one Drinking Fountain Flow Rate 0.75(gpm)?

Pex manifold [ 1 Answers ]

I am adding a new bath and using pex to plumb the supply lines. It is only 10 feet from the hot water tank. All the existing supply lines are 1/2 inch copper right from the meter which is 35 feet at the other end of the house. Question is all the manifolds I see have a 3/4 inch inlet. Will I...

CPVC manifold? [ 3 Answers ]

I've read that PEX manifolds can be used to reduce energy costs by reducing the amount of water that must be flushed from the lines each time hot water is requested. I prefer working with cpvc rather then PEX and I'm wondering if the same efficiency could be achieved by creating a cpvc manifold...

View more questions Search

Check out some similar questions!

Add your answer here.