 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Charging a 2ton unit and the suction line pressure is at 90psi and the liquid line is at 175 psi.new line set,no kines,instill filter on both lines.new air handler and coil.
When the yellow jacket brand gauges are put on a 3 ton Tempstar heat pump what should the correct suction pressure and head pressure be. I suspect it to be overcharged in freon. Because it is freezing the compressor, accumulator tank and all the lines soild ice.
Hi there I have a fairly modern combi boiler. It is located in a cupboard upstairs in a two storey house. Last year I had problems with losing heat in my radiators and each time I bled them I had to pump water back into the system (by opening valves on the base of the boiler). However, the...
Good Morning! We bought a split-level, 1977 house about a year ago and are experiencing our first problem with it... the water pressure seems to be dropping. When we first bought the house, the pressure was strong. I don't know exactly when it happened, it has been getting gradually worse, but...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
