Ask Experts Questions for FREE Help !
Ask
    jennacass's Avatar
    jennacass Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 30, 2013, 01:19 PM
    Can I put an above ground pool over an existing sprinkler system
    Can I put an above ground pool (soft side INTEX) over an existing in ground sprinkler system?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Apr 30, 2013, 02:35 PM
    Hi Jenna

    I see no reason you can't as long as you remove/plug any sprinkler heads that would end up under the pool AND you keep in mind that should the existing sprinkler pipe start to leak at anytime in the future you will NOT be able to find the leak under the pool and will need to reroute the sprinkler line to remove the leak and get things back up and running, right?

    Back to you...

    Mark
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sprinkler system-sprinkler runs when zone is turned off-why? [ 0 Answers ]

Sprinkler system-sprinkler runs when zone is turned off-why? The thumb screw is closed at valve. Water comes out of sprinklers when water is introduced to system. Only way to turn off sprinkler water seems to be turning off the water to the system.

Can I splice tap a new ground bus bar to an existing ground wire? [ 3 Answers ]

I am installing a new ground bus bar for telecom equipment grounding in an existing building. There is an existing ground cable coming from and existing transformer and down into the slab. The grounding point is nowhere to be found. Hence, the question whether it is acceptable to splice tap the...

Can you put a brace on a filled above ground pool? [ 3 Answers ]

Can you put a brace on a above ground pool that is filled with water to make it more stable

Add city water to well system for sprinkler system. [ 6 Answers ]

Hello, My sprinkler system runs off an irrigation well system with a bladder tank. The well has a 1HP Jet pump that will only pump 8 gpm @ 40-60 psi. As the system runs after 3-4 minutes the pressure will drop to 20 or so psi and the sprinkler heads start to drop. So I'm not getting enough water...

Above ground pool put in the ground [ 1 Answers ]

I'm installing an above ground pool into the ground. I need some step by step instructions on how to install the liner and make sure the pool is good and round before I start filling it with water. Will the roundness take better shape when I fill it?:rolleyes:

View more questions Search