[crokante]

I'm having this problem:

The furnace (HEIL 5000) start fine but not the fan. After 3 minutes heating the unit turn off itself and the fan start working for 30 second and the goes off. Then repeats the cycle.

A workaround (mikey mouse) I found is doing a bridge between the 1st contact and the 5th one (starting from the right) -see pic:

https://www.dropbox.com/s/8q3wss0l5u...JPG?n=10386083

This way the unit works fine the whole day.

But... if I want to use in the Air Conditioner cooler mode, I need to restore the connection to its original configuration.

Any recommendation about replacing the fan module HeatCraft model FTC5-EHO1 or/and the capacitor (see pic: https://www.dropbox.com/s/ocr5ondkig...acitor-1.JPG?m )

Also, I can find any place to buy those replacement parts (ebay, Google, etc.)

Thanks so much for any advice!

[Grady White]

That same furnace was sold by Sears. Maybe you could find the part on their site. On the furnace data plate should be a manufacturer's number. Try looking for parts using that number.

[crokante]

Thanks Gary!