Ask Experts Questions for FREE Help !
Ask
    john19999's Avatar
    john19999 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 19, 2013, 10:03 PM
    Bryant furnace repair forum
    I have BRYANT 394GAW048100 furnace. It works fine. However, once heat cycle is over, fan stops and then in about 2 or so seconds, fan starts again and sops in about 2 seconds. The strange thing is that if I turn off the furnace for 8 or 10 hours and turn on, the fan turning on/off issue is resolved for several days and issue starts again. What could be the reason. How to fix this problem

    Thanks
    John19999

Check out some similar questions!

Bryant furnace repair [ 2 Answers ]

I have a 1975 Bryant furnace. The blower comes on right away, but no heat.

Repair of furnace blower for Bryant 350MAV [ 2 Answers ]

I was told by a service repair firm that the blower motor and wheel needs replacing for a Bryant Model 350MAV condensing gas furnace (10 years old). There is quite a bit of noise when it runs and the unit vibrates at bit at the blower housing. His cost was nearly $1000. I think I can do it...

Bryant furnace repair [ 1 Answers ]

Why won't the blower on my older gas furnace work

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.