Ask Experts Questions for FREE Help !
Ask
    HSOrtiz's Avatar
    HSOrtiz Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 6, 2013, 01:14 PM
    Just installed new water heater no hot water comes out at all
    Just installed new water heater, after installation the cold water comes out but the hot water does NOT
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Apr 6, 2013, 01:45 PM
    Who installed water heater?
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #3

    Apr 6, 2013, 01:47 PM
    Is there a valve on hot water side pipe ? If so, open it.
    Did you install nipples on top of the heater as indicated by arrows ? ( Hot should point UP, cold DOWN)

    Back to you / Milo
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

New hot water heater installed, but no hot water pressure. Plenty of cold water? [ 11 Answers ]

Hi, I own a small plumbing service and have a problem I've never encountered before. I installed a new top vented gas water heater for a customer. Turned the main back on, bled air out of the lines, etc. Problem is there is no hot water pressure throughout the house. Cold water pressure is fine....

Low hot water pressure after a new kenmore water heater installed [ 1 Answers ]

What would be the cause of low hot water pressure?

Installed new hot water heater but still no hot water just cold water [ 8 Answers ]

Just installed a new electric hot water heater. The tank is getting hot but the water in the house is luke warm. Please help!

I installed a new electric water heater. Now the water fades from hot to cold [ 5 Answers ]

New water heater installed old one was a 30 gal new one is 40 gal. when I run the hot and cold it fades between the hot and cold. I lost some water pressure but not a lot. Can anyone suggest what can be causing this?

Installed new hot water heater but still no hot water just cold water [ 1 Answers ]

We installed a new hot water heat and we still do not have hot water. We were having our bathroom remodeled at the same time the water heater went out. So now the plumber is saying that the contractor probably put one of the faucets in the bath room backwards so it is prventing the hot water to go...

View more questions Search