Check out some similar questions!
How do you adjust the pressure switch on a Utilitech 3/4hp Jet Pump?
[ 6 Answers ]
I think I messed up the standard adjustment of the Utilitech Pump which is set at 20/40 from the factory. Now I can't get the pump to stay on since I adjusted it? Curious if anyone knew any tricks?
How do I prime utilitech pump
[ 1 Answers ]
How do I prime utilitech pump
Pump priming
[ 1 Answers ]
Today I tried to have my house power washed and within less than half an hour my water pump was drained with no pressure reading on the gauge. AS I have done before, when pressure goes below about 20 lbs, I shut of pump. After it stands for a few hours it will usually begin to pump and fill my...
Priming the pump
[ 1 Answers ]
My parents are out of town and when I came to check on the house I went to the restroom and flushed, it wouldn't no water was in the tank, I have heard my dad talk about sometimes he has to prime the pump, I'm wondering how I do this? View more questions Search
Add your answer here.
|