Ask Experts Questions for FREE Help !
Ask
    rlteddy's Avatar
    rlteddy Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 9, 2013, 08:09 AM
    Maytag washer model no. LAT9306AAE starts, fills then stops on normal cycle.
    It I turn the dial through the normal cycle nothing happens. If I turn it to spin on delicate cycle, it will drain.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Mar 9, 2013, 11:26 PM
    It sounds like you need a new timer. I cannot think of any other reason for this to happen. Here are some manuals: https://dl.dropbox.com/u/8010163/Maytag%20Washers.zip
    https://dl.dropbox.com/u/8010163/Und...c%20washer.pdf
    rlteddy's Avatar
    rlteddy Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Mar 11, 2013, 04:33 PM
    Could it be possible that it is the belts? It was able to do a whole mini cycle on delicate but it won't do anything larger or anything on normal cycle.The timer still ticks and moves it just misses parts of the cycle, the agitation part mostly and then it won't spin at times...
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #4

    Mar 11, 2013, 07:40 PM
    You should definitely check it out, but it seems to be a remote possibility because it would seem that the same belts are used on all cycles.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My Maytag washer fills with water and stops working? Buzzing sound no movement? [ 0 Answers ]

There is a buzzing sound after water fills. About a week ago my wife overloaded it with towels and when in spin cycle there was a loud bagging sound, not sure if that will help with why its not working. Thanks

AC starts a cycle stops and loud noise starts from inside Air Handler. [ 1 Answers ]

The central a/c unit worked fine all day and in the evening started a new cycle stopped after about 30 seconds and started making a loud noise inside the air handler for around 90 seconds and tried to start a new cycle without success. I turned the unit off overnight and back on the following...

Washer machine will not complete entire cycle. It gets to the spin cycle, and stops. [ 1 Answers ]

I have a GE washer, (about 5 years old). The washer goes through the wash and rinse cycles fine. When it gets to the spin cycle, it stops. I can override and manually place the machine on spin. How can I fix this problem so the cycle runs through completely. Thank You

Kenmore Washer Fills, Agitator Starts and Stops [ 2 Answers ]

Hi: I have a 14 year old Kenmore top load washer. Today while doing a load, the washer filled as normal, but now the agitator starts for about 5 seconds then stops for about 4 minutes, this has been going on for about 2 hours now. Is the washer toast? Is it something that can be repaired? ...

View more questions Search