Ask Experts Questions for FREE Help !
Ask
    ejpowell's Avatar
    ejpowell Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Feb 19, 2013, 07:11 PM
    Kenmore frontload washer
    Code flashes f11 cycle starts stop after a second or5 can't get door to open
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Feb 20, 2013, 12:04 PM
    Look at this: https://dl.dropbox.com/u/8010163/Ken...sher_Elite.pdf
    https://dl.dropbox.com/u/8010163/How...e%20Manual.pdf
    You will need to check the door lock solenoid and the micro-switch with an ohm meter. There are several safeties, as well.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool Duet frontload washer f05 [ 3 Answers ]

How do I fix this error code. I understand it is a water temp sensor error but where is it and what do I do. Thanks in advance for any help you can provide

Kenmore stack washer/dryer - washer makes noise during wash [ 2 Answers ]

My son has a Kenmore stack washer/dryer that makes a noise that sounds something like a gear when washing only. Could this be a transmission problem? Jay

Frontload Washer water leak [ 8 Answers ]

Hi, I've got a front-loading washing machine. The soap tray is in the front upper left-hand corner, like most machines. Water is supplied to the tray, goes out the back and there is a tube going down into the machine from there. Instead of going into the drum, the water goes directly out...

View more questions Search