Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Washing Machine cold water intake
[ 3 Answers ]
I have a build up of a metallic susbtance at the cold water intake trap that goes into the washing machine. I remove the hose, clean out the substance with q-tips, replace the hose and wait for the build up to appear again. I have replaced the hoses to the washing machine, have no build up at any...
Washing machine cold water valve
[ 4 Answers ]
The handle of the valve moves but the valve remains closed. How do I replace ? It's in a plastic box surrounded by sheet rock and not sure how it connects below the Sheetrock. Is this a do it yourself job or call a plumber?
How to get cold water to turn on washing machine?
[ 3 Answers ]
I too have the same problem, only get hot water in the machine, and does not rise, but if I put the machine on cold water I get nothing but when I run the water hose in it and fill it up with cold water it will start up and does the same when I fill it up on the rise cycle. Well any suggestions on...
Why is the cold water only dribbling into my washing machine?
[ 1 Answers ]
I live in the city so I am on city water. Just recently My cold water only dribbles into my washing machine. Help Please!
Cold water not coming out in washing machine
[ 5 Answers ]
The cold water dribbles into the washing machine when loading; I checked hose connecting machine to faucet in back. The screens were dirty; every time I do load the screens get dirty again. Is stuff coming out of the faucet? It seems to me. What does that mean? The hot water faucet is fine. My... View more questions Search
|