Ask Experts Questions for FREE Help !
Ask
    tidesny's Avatar
    tidesny Posts: 12, Reputation: 1
    New Member
     
    #1

    Feb 11, 2013, 05:14 PM
    Furnace inducer going bad
    What are the issues when the furnace inducer is going bad? I have changed the ignitor,the flame sensor and also the pressure switch and my furnace still starts and goes off after the burners have lit for a minute

Check out some similar questions!

Nordyne G7 furnace inducer & blower motor runs but furnace does not lite runs [ 0 Answers ]

Furnace inducer & blower motor operates but the furnace does not lite or burn

Does a furnace inducer need to be replaced? [ 0 Answers ]

I have a carrier furnace that was installed in November 2006. I had a tune up done and the technician said the inducer was vibrating. Should I replace it or will it be okay? The furnace is a 58MVB060 - high efficiency furnace. Thanks for any help you can give me.

What is an inducer on a furnace mean [ 1 Answers ]

What is and inducer and a pressure switch

Bad connections on draft inducer blower [ 0 Answers ]

I have a Bryant Plus 80 furnace. Every once in a while it stops working. If I wiggle the wires under the draft inducer motor, the fan comes on and the furnace works great. I only had to do it this a couple of times last winter but already, as the weather is turning cold, I need to do almost...

Furnace inducer motor [ 5 Answers ]

What are the implications of a furnace inducer motor drawing high Amps?


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.