Ask Experts Questions for FREE Help !
Ask
    TERRRE's Avatar
    TERRRE Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 4, 2013, 02:20 PM
    Central electric furnace
    The blower will not stop blowing. I have to flip the breaker to make it stop. It is set on automatic. The thermostat is working .is there a relay switch or a reset button on the furnace? What do I do?

Check out some similar questions!

Intertherm Central electric Furnace [ 1 Answers ]

We have an old INTERTHERM Central Electric Furnace Model: FEH-012HA. The blower operates fine but we are not getting any heat. I figure that the heating element or a relay turning it on is bad, but the schematic/wiring diagram is old and faded. Questions: Where can I find the wiring diagrams,...

Central electric furnace [ 2 Answers ]

Trouble shooting 1987 model number 3400-815 electric furance

I have a central electric furnace [ 0 Answers ]

I have a central electric furnace and I have replaced the sequincer and the limited switch and fuses and still no hot air. And I have checked the heating element! And still no hot air. How do I fix this?

Central Electric Furnace Co [ 1 Answers ]

I have a unit model#EB20B. The pilot comes on but the fan will not turn. I can turn the thermostat from 50 to 70. No fan.

Intertherm electric central furnace [ 4 Answers ]

I have an Intertherm Central electric furnace model FEH-017H-C It has run perfect for years but lately the fan will not always start up. The thermostat clicks on the heater coils and after about 12 seconds the fan kicks in and circulates the warm air. Occasionally the thermostat clicks...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.