[weiman2012]

I'm looking for a web site that sales replasement parts for a (ATLAS 1040 DRILL PRESS) if anybody can help please do.

THANKS 2 ALL WHO REPLY

[crigby]

Hi,
Tha drill press dates back to 1957, I believe. They were made in the 1940s and 1950s, and maybe into the 60s. No supply of parts is known. I did find the 4 page manual, which is kind of neat. Dome simpler things might be found at a well stocked hardware store. Others might be found, with some effort, at an industrial supply place like Graingers.
Peace,
Clarke
PS Manual attached!

[weiman2012]

Hi,
Tha drill press dates back to 1957, I believe. They were made in the 1940s and 1950s, and maybe into the 60s. No supply of parts is known. I did find the 4 page manual, which is kinda neat. Dome simpler things might be found at a well stocked hardware store. Others might be found, with some effort, at an industrial supply place like Graingers.
Peace,
Clarke
PS Manual attached!

The part I am looking 4 is the driver sleeve,would I be able to find that part if I look at other drill press?

[crigby]

Hi,
Perhaps you can get a fellow owner to put calipers or a micrometer on the part and give you the dimensions so you can have one made. I found the manual at:
VintageMachinery.org | Welcome
Peace,
Clarke