Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Trane xl80?
[ 0 Answers ]
We have a Trane XL 80 Model #TDD080R936C3, installed 12-2-96 (15 years old now). It was discovered that there is a flexible gas line connector installed inside the furnace cabinet. We were told this is incorrect. I found a reference under the International Mechanical Code that reads: 304.12...
Trane xl80
[ 0 Answers ]
How do I change the filter on a trane xl80 furnace?
Trane xl80
[ 1 Answers ]
My furnace- a Trane XL80 lights for maybe 10 seconds then shuts off. It will do this for several cycles, then quit. If I turn off the thermostat and turn it on again, the sequence will repeat. I have looked into the problem and it seems that the exhaust fan (located at the bottom of the flue) isn't...
Trane XL80
[ 0 Answers ]
Hello. I'm having a problem with my Trane XL80 heater. After the ignitor lights the burners, sometimes the burners will blow right out and start again for a total of five times. Then the system shuts off, no heat. A friend tells me the sensor(?) needs to be replaced. This sensor looks like a...
Trane XL80
[ 1 Answers ]
Hello My furnace blows cold air at the beginning and at the end of each cycle, is this normal? Also the furnace seems to start every 15 minutes regardless of whether the temp. drops or not. I was watching the thermostat last night and the temp. would not drop on the thermostat screen but the... View more questions Search
|